Cuckoo Clock Deer Antlers

Cuckoo Clock Deer Antlers

Cuckoo clock deer antlers made of sturdy plastic with a wooden look. These plastic antlers will not break as easy as the old wooden antlers.

Post WW2 German cuckoo clock repair parts for the professional or hobbyist. Information on how to install these parts in a cuckoo clock. – Clockworks

Cuckoo PartsCuckoo parts descriptionIf it will not cuckooInstalling the cuckoo handsCuckoo Strike Quantity IssuesCuckoo Door Stuck OpenReplacing Bellow Tops

Please view these informational tabs to help with determining the proper parts for your clock.

Repair Parts

The most common Cuckoo Clock Repair Parts sold are the bellow tops and the hands .

The bellow tubes are usually good to reuse on the clock, just the bellow tops have cloth that rip over time and therefore the clock will not cuckoo the time out.

Repairing cuckoo bellows

If the cloth is torn, you do not need to replace the entire cuckoo bellows. You can use only the bellow tops instead.

If replacing just the bellow tops it makes things easier to get the correct size for the clock.

To get the proper bellow tops measure the length and width of the top only. Snap off the old tops off of the bellow tubes and clean the surface with a knife , then epoxy the new tops on the same way. Then transfer the cuckoo lift rings from the old tops to the new ones and its done.

Cuckoo Clock Repair

• Fix Common Issues
• Find a New Movement
• Cuckoo Clock Parts
• Cuckoo Repair Kit

If the movement is worn out and is post 1950 its just as well to get the new one instead of restoring the old one .

The process of the movement restoration is time consuming and therefore expensive.

When the new movement is 100-200 dollars and will last a lot longer than the best restoration .

The content of this website is copyright by Clockworks Inc.

New cuckoo clock movement not striking

The following is for when the new cuckoo clock movement will not go into striking mode for the hours. The bird will not come out and…