Seiko 3023 5MY Kinetic Watch Capacitor Battery 5M42 5M43 5M45 5M62 5M63 5M65

Seiko 3023 5MY Kinetic Watch Capacitor Battery 5M42 5M43 5M45 5M62 5M63 5M65

Product Description

• Genuine Seiko watch part
• Brand new
• MT920 battery with optional parts (clamp and insulator)
• Replaces the old battery types: SL920 and TC920S
• This capacitor will fit the following watch model / movement numbers:

Movement Numbers:

• 5M22
• 5M23
• 5M25
• 5M42
• 5M43
• 5M45
• 5M47
• 5M54
• 5M62
• 5M63
• 5M65
• 5S22
• 7M22
• YT52
• YT57
• YT58

Seiko movement numbers are located on the back of your watch case. It is usually in XXXX-YYYY format with "XXXX" being the movement number. In this example photo, the "6117" is the movement number.

The movement number can also be found on the watch movement itself (may require magnifier).

Installation Guide:

• Do not try to test the voltage for this capacitor as this may result in damage. This is a rechargeable battery so it will fully charge by kinetic or solar power (depending on your watch).
• Open the case back
• Install the new capacitor in the same way as the old capacitor was installed. Take note of the positioning of the capacitor

Tips:

• For Kinetic watches: The watch rotor in your watch movement needs to be rotated about 400 revolutions to store enough power. Wear your watch and walk about 1720 meters (0.5 miles) or until the watch starts operating normally again.
• For Solar watches: Place the watch in direct, strong sunlight or under a strong fluorescent light at a distance of about 20 cm or 8 inches until the watch starts operating normally again.
• If you watch does not operate normally, double check the installation. A factory watch reset usually solves many problems. Please refer to your instruction manual.

ABOUT YOUR ORDER

• All returns must be returned in the same condition as it was received. Include all original packaging such as boxes, tags, etc.