VFD 220V 15HP 11KW Vector Control Variable Frequency Drive Inverter motor CNC

IMPORTANT NOTE

• The variable frequency drive can only drive three-phase asynchronous motors and cannot be used as a power source.
• If your motor is heavy load, pls choose a higher horsepower vfd than your motor's
• To protect the VFD, be sure to press the red button "Stop" and turn off the power when you stop using it.

220v 11kw (15HP) VFD Specifications

Applicable motor power≤11kw(15hp)

Input valtage220VAC(+/-5%) 1 or 3 phase （”R“,”T“ terminals for 1 phase input，”R“,”S“.”T“ terminals for 3 phase)

output valtage3 phase 220v

input Frequency47-63Hz

output frequency0-400Hz, 0-50Hz/60Hz （According to motor setup)

rated current68A (Represents the maximum current the VFD can withstand,this is a fixed value)

Suggested wire specifications6 square millimeters copper wire

vfd specifications8.5 x 9.84 x 11.81 inches

How to connect the motor

Basic parameter for 400hz spindle

Set p0.03=400，p0.04=400，p0.06=400，p2.02=400

( Note ：This is to match the basic parameters of the 400hz spindle, do not need to set other parameters can be connected）

Basic parameter for 3 phase 50/60Hz motor

Set p0.03=50/60, p0.04=50/60, p0.06=50/60，p2.02=50/60

( Note ：The default setting of the VFD is 50hz, which can be directly connected to the motor for driving)

DC cooling fan/Aluminum base

• DC cooling fan low noise, large air volume help vfd heat dissipation, improve product stability
• Aluminum base: This ensures the stability of the product and increases the heat dissipation capacity of the fan

Multiple terminals

• Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting.
• Adopt DSP vector control to enable motor to achieve high torque in low speed rotati
• Support external potentiometer for remote control.（"COM" and "S1" terminal connection your controller switch. then set P0.01=1）
• supports mcah3 function and RS-485…